Hydraulic Crawler Cranes(Conventional model)
CKE1100
Main Specifications (Model: CKE1100)
| Crane Boom | Max. Lifting Capacity | 110 t × 3.6 m*** |
|---|---|---|
| Max. Length | 70.1 m | |
| Fixed Jib | Max. Lifting Capacity | 10.9 t × 22.0 m |
| Max. Combination | 61.0 m + 21.3 m | |
| Main & Aux. Winch |
Max. Line Speed | 120 m/min (1st layer) |
| Rated Line Pull (Single Line) |
108 kN {11.0 tf} | |
| Wire Rope Diameter | 26 mm | |
| Wire Rope Length | 265 m (Main), 235 m (Aux.) | |
| Brake Type | Spring set hydraulically released multiple disc brake (Negative) |
|
| Free-Fall Brake Type | Wet-type multiple disc brake (Optional) |
|
| Working Speed | Swing Speed | 3.2 min-1 {rpm} |
| Travel Speed | 1.4 / 1.0 km/h | |
| Power Plant | Model | HINO P11C-UN |
| Engine Output | 247 kW / 2,000 min-1 {rpm} |
|
| Fuel Tank Capacity | 400 liters | |
| Hydraulic System | Main Pumps | 4 variable displacement |
| Max. Pressure | 31.9 MPa {325 kgf/cm2} |
|
| Hydraulic Tank Capacity | 535 liters | |
| Self-Removal Weight | Coun terweight/Crawler self-removal | |
| Operating Weight* | Approx. 99 t | |
| Ground Pressure* | 92.9 kPa {0.95 kgf/cm2} |
|
| Counterweight | 34.0 t | |
| TransportWeight** | Approx. 40.7 t | |
Units are SI units. { } indicates conventional units.
Working speeds in table are for light load. Working speed varies with load.
* Including upper and lower machine, 34.0 ton counterweight, basic boom, hook, and other accessories.
** Base machine with gantry, boom base, carbody,trans-lifter, wire ropes, lower spreader and upper spreader.
*** Auxililiary sheave is necessary.
(Unit: mm)
Please click the buttons below to download spec book and colour brochure.
(1.1MB)
(0.5MB)
Adobe Reader is required for viewing catalogs (PDF format).
Click here to download.
