Hydraulic Crawler Cranes(Conventional model)
7070
Main Specifications (Model: 7070-1F)
Performance | Crawler crane | Luffingtower | |
---|---|---|---|
Maximum lifting capacity | 70 t × 4.0 m | 13 t × 12.0 m | |
Rear drum | 9.1 m ~ 54.9 m | 21.3 m ~ 42.7 m | |
Jib (tower jib) length | 6.1 / 12.2 / 18.3 m | 18.3 m ~ 30.5 m | |
Maximum boom (tower) length+jib (tower jib) length |
45.7 m + 12.2 m | 42.7 m + 30.5 m | |
42.7 m + 18.3 m | |||
Line speed | Front drum hoisting/lowering | *120 ~ 3 m/min | |
Rear drum (tower jib) hoisting/lowering | *120 ~ 3 m/min | ||
Third (optional) hoisting/lowering | *120 ~ 3 m/min | ||
Boom (tower) hoisting/lowering | *70 ~ 2 m/min | ||
Swing speed | 4.0 min-1 {4.0 rpm} | ||
Travel speed | *1.9 / 1.2 km/h | ||
Operating weight (basic position) | 71.1 t | 75.6 t | |
Ground pressure (basic position) | 80 kPa {0.81 kgf/cm2} | 85 kPa {0.86 kgf/cm2} | |
Gradability (tanΘ) | 40 % (21.8 degree) | - | |
Rated line pull | 68.6 kN {7.0 tf} | - | |
Engine | |||
Type | Mitsubishi 6D16-TLE2A | ||
Rated power | 147 kW / 2,000 min-1 {200 PS / 2,000 rpm} |
||
Wire rope diameter | |||
Front drum | ø 22 mm | ||
Rear drum | ø 22 mm | ||
Third drum (optional) | ø 22 mm | ||
Boom (tower) winch | ø 16 mm |
The units are SI units under the international unit system and the units indicated within { } are traditional ones.
Line speeds based on single line, no load and first layer of rope drum.
Speeds marked with an asterisk (*) are the values under light loads and they vary depending on loads.
Specifications are subject to change without notice.
Please click the buttons below to download spec book and colour brochure.